Callaway Golf Xr Driver Callaway Launches European Market Exclusive Xr Speed Driver And Xr Sitewide
Kinds of drivers There are three golf driver types according to the material that they are made of: the alloy drivers stainless steel and forged titanium. Alloy golf drivers have shafts made of stainless steel or graphite and Ti Alloy heads. They are great for driving the ball into the first course. Stainless steel drivers on the other hand come with hard and strong heads and are the most common choices among the golf driver types. They have compact heads and are heavier than the alloy and titanium varieties. Finally there are the forged titanium drivers. These golf drivers are composed of titanium heads and shafts that are made of lightweight graphite.
Introduction There is an overabundance of golf driver reviews on the internet. Many people are not familiar with the technological advancements of modern-day drivers. In addition to that many of the online reviews can be misleading or misinformed. By educating yourself you will know what kind of driver will suit you. The first thing to consider is the clubhead size. Most manufacturers offer clubheads today at the USGA limit of 460cc volume. This volume became common with the introduction of titanium clubheads. Titanium is much lighter than steel and therefore can have a larger size while maintaining traditional weight. This volume is preferred by the majority of golfers simply due to the fact that a larger head size corresponds to a larger "sweet spot". This is very important to average golfers because it is easier for them to make good contact with the ball.
It should essentially be within 7.5 degrees to 13 degrees. The angle decides on how well you get the ball high into the air. If you are an amateur go for a lower value if not go for the higher angle. As far as the shaft length factor the longer the shaft the more is the speed. So you could opt for lengths between 43-46 inches. As far as the material of the shaft is concerned you have a plethora of steel graphite and other materials available. For the modern times graphite should suit your putting needs. Lastly you need to finalize on the grip size which should essentially be smaller because larger grips reduces the swing of the club.