Golf Drivers Under 200 Categories
Nevertheless hitting the golf ball clean can be difficult and you can end up hitting a fat thin or a topped shot. This difficulty is far more pronounced with double digit handicapped golf players together with beginner golf players. Main Reasons Which Usually Lead To Fat Or Thin Hits: Within the golf driver swing clean hits depend mainly on the stance golf ball positioning inside the tee box the backswing and the downswing. When you have a tendency to bend over too much during the backswing and then you do not return to the normal position at impact this can result in a thin shot. When you are positioned too close to the ball then your angle of attack becomes too sharp and may result in a fat shot.
Once a swing pattern is established there is always an "optimal". The driver that is optimal for your swing will get you the most distance for your particular swing. I have always been intrigued by the fact that the players in the Remax Long Drive Championships DO NOT use major manufacturers such as Calloway or Titleist or Ping. Since these players do not receive large endorsements and every yard is desired out of every swing you would think these guys use what hits the ball the furthest. And although we might not need or be able to swing a 50 inch driver we all need more distance and I think the clubs these long drivers use are probably the best made for maximizing distance. Instead of the popular named brands we see the long drivers currently using two main driver companies Geek and Krank. Geek and Krank are the leaders in long driver golf equipment. It makes sense to me that most of us regular golfer should be using these types of drivers to add yardage to our swings. You do not have to get a long driver length shaft in these clubs.
It should essentially be within 7.5 degrees to 13 degrees. The angle decides on how well you get the ball high into the air. If you are an amateur go for a lower value if not go for the higher angle. As far as the shaft length factor the longer the shaft the more is the speed. So you could opt for lengths between 43-46 inches. As far as the material of the shaft is concerned you have a plethora of steel graphite and other materials available. For the modern times graphite should suit your putting needs. Lastly you need to finalize on the grip size which should essentially be smaller because larger grips reduces the swing of the club.