48 Driver Golf 48 Inch Golf Driver For Sale 48 Driver Golf Golf Tips Hit The Driver Longer Swagg Lifestyle Blog
It should essentially be within 7.5 degrees to 13 degrees. The angle decides on how well you get the ball high into the air. If you are an amateur go for a lower value if not go for the higher angle. As far as the shaft length factor the longer the shaft the more is the speed. So you could opt for lengths between 43-46 inches. As far as the material of the shaft is concerned you have a plethora of steel graphite and other materials available. For the modern times graphite should suit your putting needs. Lastly you need to finalize on the grip size which should essentially be smaller because larger grips reduces the swing of the club.
Nevertheless hitting the golf ball clean can be difficult and you can end up hitting a fat thin or a topped shot. This difficulty is far more pronounced with double digit handicapped golf players together with beginner golf players. Main Reasons Which Usually Lead To Fat Or Thin Hits: Within the golf driver swing clean hits depend mainly on the stance golf ball positioning inside the tee box the backswing and the downswing. When you have a tendency to bend over too much during the backswing and then you do not return to the normal position at impact this can result in a thin shot. When you are positioned too close to the ball then your angle of attack becomes too sharp and may result in a fat shot.
Adjustable Weights When reading golf driver reviews you might hear the term "adjustable weights". Some modern-day drivers have adjustable weights in the sole or internal weighting to help golfers reduce a slice or hook. For the most part this feature is pretty limited to a small percentage of new golf drivers. If an adjustable weight system does not sound like a desirable feature slice golfers should choose a driver with a draw bias while hook golfers should choose a driver with a slice bias. Additional Technological Advancements Most manufacturers today are continuously pushing the envelope with regards to USGA limits. There is a limitation of 5900 gram-centimeter squared with regards to Moment of Inertia (MOI). This term refers to the clubheads resistance to twisting when off-center shots are made. The greater the MOI rating the more forgiveness that golfers will receive from off-center shots.