New Golf Drivers Old And New Golf Drivers Beside One Another Stock Photo Image Of
Adjustable Weights When reading golf driver reviews you might hear the term "adjustable weights". Some modern-day drivers have adjustable weights in the sole or internal weighting to help golfers reduce a slice or hook. For the most part this feature is pretty limited to a small percentage of new golf drivers. If an adjustable weight system does not sound like a desirable feature slice golfers should choose a driver with a draw bias while hook golfers should choose a driver with a slice bias. Additional Technological Advancements Most manufacturers today are continuously pushing the envelope with regards to USGA limits. There is a limitation of 5900 gram-centimeter squared with regards to Moment of Inertia (MOI). This term refers to the clubheads resistance to twisting when off-center shots are made. The greater the MOI rating the more forgiveness that golfers will receive from off-center shots.
Usually fat or thin hits are generally seen whenever the body is under a great deal of tension and this produces a misinterpretation of the distance between the golf ball and the golf club. Eliminate Fat Or Thin Hits: Fat or thin hits with the golf driver swing can be cured simply by working hard so that you can neutralize the above mentioned factors that result in fat or thin hits. Stance: It is necessary to take your position using the correct distance between the golf ball and yourself nonetheless you should not be too close or too far from the golf ball. There should be more than enough space between your body and the golf ball to make sure that the golf club can swing freely as well as smoothly.
It should essentially be within 7.5 degrees to 13 degrees. The angle decides on how well you get the ball high into the air. If you are an amateur go for a lower value if not go for the higher angle. As far as the shaft length factor the longer the shaft the more is the speed. So you could opt for lengths between 43-46 inches. As far as the material of the shaft is concerned you have a plethora of steel graphite and other materials available. For the modern times graphite should suit your putting needs. Lastly you need to finalize on the grip size which should essentially be smaller because larger grips reduces the swing of the club.